<s id="u19wi"></s>
      <track id="u19wi"><div id="u19wi"></div></track>
      <track id="u19wi"></track>
    1. <track id="u19wi"></track>
      <track id="u19wi"></track>

              <track id="u19wi"></track>

              NEWS
              新聞中心
              NEWS
              新聞中心
              CONTACT
              聯系我們

              Contact Person: Miss Wang

              Phone: 15999898070

              Telephone: 0769-87883409

              Email: cl-tk@chulun.com.tw

              Address: Room 101, Building 4, No.8 Qinghe Road, Huangjingkeng, Huangjiang Town, Dongguan City, Guangdong Province

              INDUSTRY

              Binzhou where to buy terminal machine

              Author:Dongguan julun Machinery Co., Ltd. View:0 Time:2021-07-24

              Where to buy a terminal machine in Binzhou

              Where is there a computerized wire cutting machine terminal machine for trial production? 10PCS will be sent to IPQC for first piece confirmation, and the inspection is OK before mass production can be carried out. In the workshop production process, the operator must self-check Check whether there are defects such as rubber encapsulation, hanging neck, etc. on the terminals, and conduct a terminal machine tensile test every 1 hour. Multiple inspections can avoid more losses for the enterprise. Thereby strengthening the cost saving of the factory. After finishing the production in the workshop, arrange the good products,


              1


              2


              Where can I buy a terminal machine in Binzhou? After the processing of one kind of wire is completed, paste a sticker on the rubber tray, and be sure to indicate the type of terminal machine and wire specifications used for the wire And the processing of the same number of lines, Binzhou Where to buy the terminal machine, after the equipment has been running continuously for 1 hour, it is necessary to re-check to confirm the opening and stripping length of the terminal machine and whether the opening effect is qualified, and then continue production after confirming that it is qualified. You can try the regular terminal machine operation method of Julun Machinery. Automatic terminal machineThe five major installation steps are introduced.

              Waste defective products, and clean up the environment around the automatic terminal machine. ——Dongguan Julun Machinery Co., Ltd.

              Double-head crimping terminal machine: choose plc or single-chip control,

              Dongguan Julun Machinery Co., Ltd. is engaged in the production and sales of regular terminal machines, computer stripping machines, wire and cable processing equipment 2113. Wire harness connector processing equipment and various connectors. .Service as a professional enterprise. The company has a large number of professional and technical personnel, a strong after-sales service system and advanced precision processing equipment. Its electrical and mechanical accessories are imported from Taiwan 5261 and Japan, combined with advanced technical experience in Europe, America and Taiwan , Continue to develop, innovate, and provide customers with 4102 high-quality, high-efficiency products and services

              Full-automatic parallel wire terminal machine. (It adopts PLC or single-chip control, servo motor or stepper motor to provide power. The production process does not require manual participation, and the production efficiency is high. This type of domestic equipment can realize about 7000pcs of wire cutting per hour and 11000pcs of terminal crimping. The mid-term is 3500pcs. Parallel wire crimping terminal, 7500pcs is a single wire crimping terminal, which can automatically detect the crimping quality of the terminal. It has the functions of the above three automatic terminal machines. It is currently one of the regular terminal machines with a very good degree of automation in the domestic market)


              3


              Servo motor or stepper motor power supply, the production process does not require manual intervention, compared with single-head pressing can work together with double-head pressing, the output power is high, now this type of domestically produced The equipment can complete about 4500pcs wire cutting, thin-skinned, double-ended crimping terminals per hour, and can actively detect the crimping quality of the terminals with extremely high accuracy. Where is the computer thread cutting machine in Anshan


              4


              The automatic terminal machine has won the favor of the majority of enterprises for its high efficiency, hands-free, high precision, and ultra-quiet advantages. Of course, 1653 must choose the right one according to the needs of your own business. Hope it helps you. For the application and principle of the terminal machine, please refer to the product data of Dongguan Julun Machinery Co., Ltd. Hope to help you all. Our company's products are mainly companies that include stripping and tapping machines and pressure monitoring. You are also warmly welcome to call and write to us for consultation.


              5


              Where to buy a terminal machine in Binzhou

              If the relay is broken, the ultra-quiet terminal machine is always hitting it,Stripping tape terminal machine" a>If the inverter main board is not broken, it means there is a problem with the relay. How to set the mute terminal inverter inverter. The original imported terminal machine inverter made by each manufacturer is different, you can refer to the manual to set up. The ultra-quiet terminal machine will not move after a long time. Look at the terminal machine motor and pedal. Is there something wrong with the circuit? It is possible that the copper sleeve is stuck, so try adding some oil.

              Market demand for regular terminal machines: What is the difference between semi-automatic terminal machines and automatic terminal machines? Which is better? 1. The automatic terminal machine is a terminal machine that integrates a server (silent type). Its operating principle is not the same as that of a general terminal machine. It only needs to send a message to the server, and this information is then transmitted to the motor. A movement can be made by attacking the automatic terminal machine. 2. Semi-automatic terminal machine, we generally call it terminal machine, which is the kind of vertical desktop terminal machine that we often see in the general market now.

              Terminal machine failure: bad crimping terminal bad crimping terminal may be completely crimped, or not reach the crimping position, resulting in bare copper wire. At this time, the terminal machine needs to check whether the gun-type swing arm conduit is installed on the wire. Whether the terminal blade of the swing arm catheter is relatively straight; whether the auxiliary pressing block of the regular terminal is loose; check whether the interval between the regular terminal and the automatic machine has been changed. Check again after making changes. Only after there is no problem can the terminal machine continue to work.

              Where to buy a terminal machine in Binzhou


              6


              Fully active parallel terminal machine: select plc or single-chip control, servo motor or stepper motor for power, the production process does not require manual participation, and the production power is high. Now this type of domestically produced The equipment can complete about 7000pcs of wire cutting per hour and 11000pcs of terminal crimping. During the period, 3500pcs is parallel wire crimping terminal, and 7500pcs is single wire crimping terminal. It can actively detect the quality of terminal crimping. It has the functions of the above three full-active terminal machines. It is one of the terminal machines with a high degree of automation in the domestic market.

              Where to buy a terminal machine in Binzhou


              7


              7


              Regular terminal machine use teaching materials, what does the terminal machine do? what's the effect? The regular terminal machine refers to a machine used in wire processing. Where can Binzhou buy a terminal machine, it can press the metal head to the end of the wire. Then it can conduct conduction. The terminal produced by the regular terminal machine is usually for more connection Convenient, the two wires can be connected together stably without soldering. When removing, just unplug the power supply. This is more convenient for the use and maintenance of the regular terminal machine.


              Where to buy a terminal machine in Binzhou


              8


              The possible cause is that the wire feed wheel is too tight or too loose. At this time, we can fine-tune the gap between the two wheels with a steel wire roller, so that the steel wire will not become flat and too loose. The principle is roughly similar to the peel length. 2. Terminal machine failure: poor crimping terminals may lead to complete crimping, or not reaching a better crimping position, resulting in bare copper wires. At this time, it is necessary to check whether the gun-type swing arm catheter is installed on the wire. Whether the terminal blade of the swing arm catheter is relatively straight; whether the auxiliary pressing block of the terminal is loose; check whether the interval between the terminal and the automatic machine has been changed.



              News
              Related Product
              Online Service
              contact details

              contact number:

              0769-87883409

              Pre-sales advice:

              15999898070

              Business mailbox:

              cl-tk@chulun.com.tw

              QR code
              C S
              亚洲最大的天堂av电影av网站|一级aaaaa欧美中文字幕录像片|free video性美国老太|1024手机基地在线免费视频观看

                <s id="u19wi"></s>
                  <track id="u19wi"><div id="u19wi"></div></track>
                  <track id="u19wi"></track>
                1. <track id="u19wi"></track>
                  <track id="u19wi"></track>

                          <track id="u19wi"></track>