<s id="u19wi"></s>
      <track id="u19wi"><div id="u19wi"></div></track>
      <track id="u19wi"></track>
    1. <track id="u19wi"></track>
      <track id="u19wi"></track>

              <track id="u19wi"></track>

              NEWS
              新聞中心
              NEWS
              新聞中心
              CONTACT
              聯系我們

              Contact Person: Miss Wang

              Phone: 15999898070

              Telephone: 0769-87883409

              Email: cl-tk@chulun.com.tw

              Address: Room 101, Building 4, No.8 Qinghe Road, Huangjingkeng, Huangjiang Town, Dongguan City, Guangdong Province

              INDUSTRY

              Wuhu automatic terminal machine factory

              Author:Dongguan julun Machinery Co., Ltd. View:0 Time:2021-07-23

              Fully automatic terminal machine is a more convenient machine, we should also know this, fully automatic mechanical equipment Those with greater help can save a lot of labor and increase the output of the factory. It can also help the factory to temporarily relieve the problem of not being able to find workers. However, we are also using the fully automatic terminal machine when we use it. There will be a problem. Some time-division automatic terminal machines will have relatively loud noises after being used for a period of time. We should all be aware of this!

              Wuhu Automatic Terminal Machine Factory


              1


              The principle of the automatic terminal stripping machine is: after the metal wire is input to the wire feeding wheel through the straightening machine, the wire feeding roller is driven by the stepping motor, and the lower right roller will make The processing line moves left and right; the blade is driven by a stepping motor, and the up and down directions are opposite. In terms of control, after the interval between the lower blades of the terminal machine, the functions of stripping and trimming can be realized. The stepping motor drives the upper left roller and the lower roller (the twisting wheel and the appearing roller physically refer to the same liquid wheel) to move back and forth in opposite directions to achieve the torque function. The fault of the terminal machine is briefly introduced into three parts: peeling fault, terminal fault and soldering fault.

              The length of the wire cut is inconsistent. A: The wire feed wheel is pressed too tightly or too loosely. Countermeasure: Adjust the straightening machine so that it can be straightened and sent out smoothly. There are two differences between professional production of terminal machines and automatic terminal machines. The first is the characteristics of the automatic terminal machine: the automatic terminal machine is an automatic machine that integrates wire feeding, wire cutting, stripping, terminal punching and other chemical machinery. The automatic terminal machine was developed and manufactured in Japan as early as, the operator only needs to touch the screen button to send information to the server, and then to the motor. The fully automatic terminal machine can complete all actions such as wire feeding, wire cutting, stripping, and terminal tapping within one second. This kind of special terminal machine is equipped with a foot-operated de-ionization 2113, because when the terminal machine is running, its motor is constantly running, and each time the foot pedal is stepped on, it will give an "O" power-off The signal comes. This is a type of our common terminal 5261 machine. The special terminal machine can also be called a terminal crimping machine or a terminal crimping machine. As companies move towards automated production, the terminal machine market in recent years has been occupied by the 4102 automatic terminal machine for most of the market.

              Remove the wire from the special terminal machine and check whether the effect of the terminal on the wire can meet the requirements. If it does not meet the requirements, the equipment must be re-calibrated. ⑤After confirming that the specifications and effects are in compliance with the requirements, submit the sample line to PQC for inspection. ⑥ After passing the PQC inspection, mass production will begin. ⑦ Arrange the wires with the terminals neatly, tie every 100 wires or every 50 wires together with rubber hoops as required, and then place them neatly in the plastic basin. ⑧After finishing a kind of thread processing, paste a sticker on the rubber cone to indicate the model of the thread, the specification and quantity of the loops.


              2


              As a humanized and intelligent high-end technology product, the automatic terminal machine is suitable for large, medium and small enterprises that need to use wire harnesses. It can save a lot of labor and is efficient Several times the semi-automatic terminal machine.


              3


              4


              What is the working principle of the special terminal machine? 1. (Principle) The motor keeps rotating. There is a breaker inside with a clutch, and every time it is moved, an "O" marked with preparation comes out, which is very common. 2. In the past five years, there has been a (silent) terminal machine with a server. Its operating principle is different from the above. It only sends a message to the server, which is then transmitted to the motor to complete an action. Fully automatic terminal machine: As long as the wire is put on, the terminal mold is set up, and the parameters are set in the screen, it can be produced.

              Wuhu Automatic Terminal Machine Factory

              Generally, it is normal to have fine noise. If it is a loud one, then there are these two problems, a. There is abrasion between certain parts and components of the terminal machine, which leads to increased conflicts; b. The screw of the terminal machine is loose during work, causing the parts to vibrate and become rugged.


              5


              The safety of the special terminal machine: Talking about the function advantages of the special automatic terminal machine. The function advantages of the special automatic terminal machine are introduced as follows: the special automatic terminal machine refers to the wire processing requirements The machine used, also known as the fully automatic stripping and end pressing machine, is a new type of equipment that has just been released in recent years. It is a multifunctional machine integrating feeding, cutting, stripping and end pressing. It is humane and intelligent. The high-end technology products are suitable for large, medium and small enterprises, saving labor. Increase work efficiency.


              6


              Wuhu Automatic Terminal Machine Factory

              The working principle of the semi-automatic terminal machine, the diagram is to put the qualified terminals on the terminal frame according to the requirements, and install the terminal chain head into the equipment according to the correct method. Recognize the equipment knife mold Match with the installed terminal, then adjust the pressure and other parameters of the pressure monitoring, and adjust the corresponding position of the terminal chain and the device. Take the stripped wire and check for defects, then align the wire with the slot of the terminal machine and the terminal opening, adjust the position, and then step on the foot pedal with your foot to put the terminal on the wire.


              7


              Fully automatic terminal machine: As long as the wire is threaded, the terminal mold is set up, and the parameters are set in the screen, it can be produced. Terminal machines can be classified into pneumatic terminal machines, terminal machines, ultra-quiet terminal machines, automatic terminal machines, continuous terminal cutting PIN machines, continuous stripping terminal machines, semi-automatic ultra-quiet terminal machines, wire stripping terminal machines, and terminal blocks Machine, stripping machine, small diamond terminal machine, series motor stator terminal machine, computer wire automatic stripping machine, pin terminal machine, gold wire terminal machine, etc. The step angle of my stepping motor is 1.2 degrees, and the motor rotates a circle to drive the axis to move at a distance of 200mm. Now I am subdividing the drive to 1000 steps/revolution. Now the actual movement distance of the motor is 300mm. How many pulses do I need? Can it be moved to 300mm? Ask a master to help in the calculation, how to calculate it.

              Wuhu Automatic Terminal Machine Factory


              8


              How to install special terminal machine and automatic terminal machine? ①Put the qualified terminals on the terminal frame as required, and install the terminal chain head into the equipment according to the correct method. ②Confirm that the die of the equipment matches the installed terminal, then adjust the pressure and other parameters of the equipment, and adjust the corresponding position of the terminal chain and the equipment. ③Take the stripped wire and check for defects, then align the wire with the slot of the terminal machine and the terminal opening, adjust the position, and then step on the pedal with your foot to place the terminal on the wire.


              Wuhu Automatic Terminal Machine Factory


              9


              Advanced PLC or single-chip control system, self-shutdown, self-alarm and self-diagnosis for failure, safe and simple to use. Automatically display the number of packages, which can conveniently count the workload of the machine. The special terminal machine has many advantages compared with the general terminal machine, and the ultra-high-speed automatic terminal machine has more characteristics than the automatic terminal machine. The following specifically introduces its advantages in three aspects. 1. The advanced production efficiency of the fully automatic terminal machine: Because the operating mechanisms are integrated in a straight line, the production time of a single electronic wire is reduced, and the production capacity is surprisingly doubled compared with the traditional model, reaching 7000 per hour (100 length) Within



              News
              Related Product
              Online Service
              contact details

              contact number:

              0769-87883409

              Pre-sales advice:

              15999898070

              Business mailbox:

              cl-tk@chulun.com.tw

              QR code
              C S
              亚洲最大的天堂av电影av网站|一级aaaaa欧美中文字幕录像片|free video性美国老太|1024手机基地在线免费视频观看

                <s id="u19wi"></s>
                  <track id="u19wi"><div id="u19wi"></div></track>
                  <track id="u19wi"></track>
                1. <track id="u19wi"></track>
                  <track id="u19wi"></track>

                          <track id="u19wi"></track>